Each service ranges vastly in time. As our operations are currently run solo, the time expected for an average detail ranges between 3-6 hours.
However, we can provide updates via messages if needed.

For corrections, it may be up to multiple days. Again, we can message if needed, as we understand you temporarily handing over your pride & joy is a hard experience.
But do know, its in good hands, being treated with the upmost care!

Don’t forget; “good things come to those who wait!”

Workshop Process:

• Drop off your vehicle at our workshop and arrange your own transport while we work on it.

• We’ll text you when the job is complete and ready for collection.

• Before payment and key handover, you can inspect the vehicle to make sure you're happy with the results. (If anything isn't right, we'll do our best to resolve it either on the spot or at a later time)

• If some areas are still wet, don't worry, as we use distilled and de-ionised water in our workshop, which doesn’t produce typical water spots and drip marks that can occur with regular tap water.

We prioritise the condition of your carpets. In severe cases, we’ll remove as much pet hair as possible without damaging the fibres, though some hair may remain.
More aggressive methods can remove up to 90–99% of the hair, but they often cause irreversible damage to the carpet.

Odour removal is usually straightforward. We use specialised tools, products, and techniques to eliminate odours effectively. Additional charges may apply if the headliner requires cleaning, as it is a common area where odours can become trapped.

We do, however these packages are typically more limited, as we only perform our top-line details (nothing basic).

For example, our truck/larger vehicle details (“HOOOGE package”) are most similar to our “UltraLuxe Package” (with the additional services provided unlike the “Premium Package”)
And our bike details are most similar to our “Exterior Only” package, with the additional option for a multistage polish & ceramic coating.

For packages + corrections & coatings, please contact us to work out pricing.

Yup! Instead of spending extra on a ceramic coating, we offer our wax or sealant on all vehicles.
Below are some benefits & negatives to choosing a wax or sealant :)

Wax

• Ultra deep colour + organic shine + warm gloss

• Can fill and temporarily minimise deeper imperfections

• 2-6 month duration average

• Less resistant to chemicals & washes

• Additional cost occurs when topping/layering up wax

• Best suited for non-monochromatic (Black, grey, white, etc) vehicles

Sealant

• Simpler gloss enhancement

• Layers above the clear coat, and can enhance deeper imperfections

• 1-6 month duration average

• Significantly more resistant to chemicals & washes

• Always topped up after any exterior detail (including maintenance!)

• Offers the best hydrophobic water-beading properties to make washing easier

• Lacks the same deep gloss visual difference compared to wax

• Best suited for any coloured vehicles

Absolutely they can, as removing these defects scientifically comes down to levelling the surrounding clear-coat to even to provide that near-perfect finish.

However some scratches are unable to be fixed, and if any damage is past the clear coat, it requires paint touch-up (to which we currently do not offer).

Pro tip: use your fingernail to feel over a scratch. If your nail catches at all, the damage is below surface level, and requires paint touch-up.

We aim to protect & preserve your vehicle long-term

It is quite literally impossible to achieve 100% perfection, and the more we try to chase that 100%, the more risk is induced.
Removing too much clear coat can significantly reduce its lifespan by leaving it vulnerable to the harsh, Australian UV rays, external-environmental damage, and chemical etching/damage.

Our multistage (most aggressive) corrections aim for a 90-95% imperfection removal as this is the sweet-spot between amazing results & clarity, as well as long-term protection.

We’d rather sacrifice <5% defect removal to increase your vehicle’s lifespan by years/decades.

Yes, we incorporate our systems to ensure that your vehicle remains as safe as possible. Every vehicle is unique, and every process is too!

We will always use a digital paint gauge before performing corrections so we have an understanding of how much clear coat we have to work with.

The less there is, the more likely it is to burn through, and hence we will do a less-aggressive correction (and vice versa).
It can lead to less total % of defects being removed, but we want to maximise your vehicle’s paint longevity.