EXTERIOR WASH + SURFACE DECONTAMINATION & CLAY

• strip-wash with either alkaline snow foam mix, or alkaline spray in pump-sprayer

• Full wheel (rim, barrel, & tyre) deep clean

• pH-neutral Snow-foam contact wash

• Acid-wash to remove water spots (if required)

• Chemical decontamination: Iron fallout & tar removal

• Physical decontamination: Clay solution + lubrication

• Deionised & Distilled water rinse-off

• Air blower + Towel dry to remove remaining water

• Wheels removed for coating + Fenders cleaned thoroughly

• Tyre dressing application

PRE-INSPECTION TO VEHICLE’S SURFACE

• Paint gauge measurement where applicable

• First surface assessment via inspection lighting

• Notes taken + restoration strategy planned

• Small test spot created if required

MULTI-STEP PAINT CORRECTION

• Multiple machine polishers & pad types used to correct surface: ~90-95% defect removal

• Restored gloss & clarity

• Deepened paint colour

• Major defect removal - swirls, holograms, water spots, scratches only on clear coat layer, etc

• prep spray wipe-down on entire vehicle surface

• Final surface assessment before coating via inspection lighting

PAINT SURFACE CERAMIC COATING APPLICATION

• AutoSmart Hybrid Ceramic Coating (2-4 years)

• Applied to all painted surfaces

• Delicate levelling process to remove high spots

TRIM + PLASTIC + WHEEL FACE COATING APPLICATION

• AutoSmart Hybrid Ceramic Coating (2-4 years)

• Applied to all trim & plastic surfaces

• Applied to all Wheel faces

• Delicate levelling process to remove high spots

GLASS (MINUS WINDSCREEN) CERAMIC COATING APPLICATION

• AutoSmart Hybrid Ceramic Coating (2-4 years)

• Applied to all glass surfaces, minus windscreen to prevent complications scroll to “Ceramic Coating” section in our FAQ to find out why

• Delicate levelling process to remove high spots

COMPLETE INTERIOR DETAIL & DIFFUSER BLOWOUT

• Comprehensive vacuum

• Air compressor + diffuser blowout

• Physical contact interior detail with best-suited chemicals

• Dry extraction treatment to fabric floor mats & seats (can upgrade to wet extraction if necessary)

• Door jambs + hinges + kick-plates cleaned

• Glass, infotainment, & metal surface, clean & wipe-down

• Non-staining, scented fragrance application

LEATHER CERAMIC COATING + PLASTIC + FABRIC COATING

• Leather seats thoroughly cleaned & prepared

• GYEON Q² LeatherShield EVO applied to leather seats

• Fabric seats thoroughly cleaned & prepared

• AutoSmart Silver Seal - Upholstery Protector applied to fabric seats & fabric floor mats

• Rubber protecting, non-slip coating applied to rubber/weather floor mats

• Coating & polymer protection with UV inhibitors & anti-static barrier applied to interior plastics

• Machine polish to gloss plastics where/if applicable

• Leather conditioner applied to all non-ceramic-coated leather surfaces (steering wheel, door panel, etc)

WHEELS OFF + CALIPER CERAMIC COATING APPLICATION

• Vehicle is lifted and placed on jack stands

• Wheels are thoroughly cleaned and prepared for coating

• Machine polish where/if applicable

• AutoSmart Hybrid Ceramic Coating (2-4 years)

• Applied to entire wheel: lip, spokes, wheel face, inner barrel

• Applied to applicable brake calipers

ENGINE BAY DETAIL + COATING

• Full degrease inside engine bay

• Contact wash & brush where possible

• Machine polish where/if applicable

• Metal polish where/if applicable

• Rubber protecting coating applied

• Coating & polymer protection with UV inhibitors & anti-static barrier applied to plastics, trim, & rubber

• Sealant applied throughout entire engine bay for strong hydrophobic properties

• Microfibre towel wipe-down to remove excess residue & coating

FINAL INSPECTION & QUALITY CHECK + STORAGE

• Final surface assessment via inspection lighting

• Vehicle stored overnight as the ceramic coating cures

• 24/7 CCTV, MOTION-ACTIVATED ALARM SENSOR & LIGHTS ARMED

• Notes provided to vehicle’s condition after process

• Customer inspection & key handover + final payment