*Prices shown are a guide and are calculated using a small hatchback as the reference vehicle. Larger vehicles and models with harder or more demanding paint finishes, such as European vehicles, may be subject to additional fees due to increased labour.

EXTERIOR WASH + SURFACE DECONTAMINATION & CLAY

  • strip-wash with either alkaline snow foam mix, or alkaline spray in pump-sprayer

  • Full wheel (rim, barrel, & tyre) deep clean

  • pH-neutral Snow-foam contact wash

  • Acid-wash to remove water spots (if required)

  • Chemical decontamination: Iron fallout & tar removal

  • Physical decontamination: Clay solution + lubrication

  • Deionised & Distilled water rinse-off

  • Air blower + Towel dry to remove remaining water

  • Wheels removed for coating + Fenders cleaned thoroughly

  • Tyre dressing application

PRE-INSPECTION TO VEHICLE’S SURFACE

  • Paint gauge measurement where applicable

  • First surface assessment via inspection lighting

  • Notes taken + restoration strategy planned

  • Small test spot created if required

SINGLE-STEP PAINT CORRECTION

  • Single machine polisher & pad type used to correct surface: ~50-80% defect removal

  • Greatly improved gloss & clarity

  • Deepened paint colour

  • Moderate defect removal - mild swirls, holograms, water spots, scratches only on clear coat layer, etc

  • prep spray wipe-down on entire vehicle surface

  • Final surface assessment before coating via inspection lighting

PAINT SURFACE CERAMIC COATING APPLICATION

  • AutoSmart Hybrid Ceramic Coating (2-4 years)

  • Applied to all painted surfaces

  • Delicate levelling process to remove high spots

TRIM + PLASTIC + WHEEL FACE COATING APPLICATION

  • AutoSmart Hybrid Ceramic Coating (2-4 years)

  • Applied to all trim & plastic surfaces

  • Applied to all Wheel faces

  • Delicate levelling process to remove high spots

GLASS (MINUS WINDSCREEN) CERAMIC COATING APPLICATION

COMPLETE INTERIOR DETAIL & DIFFUSER BLOWOUT

  • Comprehensive vacuum

  • Air compressor + diffuser blowout

  • Physical contact interior detail with best-suited chemicals

  • Dry extraction treatment to fabric floor mats & seats (can upgrade to wet extraction if necessary)

  • Door jambs + hinges + kick-plates cleaned

  • Glass, infotainment, & metal surface, clean & wipe-down

  • Non-staining, scented fragrance application

FINAL INSPECTION & QUALITY CHECK + STORAGE

  • Final surface assessment via inspection lighting

  • Vehicle stored overnight as the ceramic coating cures

  • 24/7 CCTV, MOTION-ACTIVATED ALARM SENSOR & LIGHTS ARMED

  • Notes provided to vehicle’s condition after process

  • Customer inspection & key handover + final payment

Contact us